Top mounted Shutters

Top mounted shutters are installed only during the construction or replacement of window frames in existing buildings. The shutter box in this solution is placed on the window or door frame. Special guides are tightened to the window frame, and then the whole is mounted in the recess inside the window. Thanks to this, the shutter's chest is invisible, and it appears to be an integral part of the window.
OPTIMUS-SYSTEM offers you:

EXTRA ROLLER MX1200®

MX1200 is a shutter system that is designed for renovation and monoblock windows. The characteristic design of the box with the front access cover allows the shutter to be mounted on window frames in the dimensions from 60 to 180 mm. The PVC plastic used in the production of shutters is resistant to UV radiation, which reduces the likelihood of discoloration. The round bottom of the cover as well as the option of using the inspection flap caps and the end caps of the box in a meaningful way increase the design style. Operation is manual using a tape as well as an electric switch or remote control.

EXTRA ROLLER TL1000®

TL1000 - this solution can be implemented in new buildings as well as renovated objects. The inspection and service flap is located at the bottom of the box, which makes it possible to encase the box from the inside without fear of service access. These systems should be installed in windows in which the maximum thickness of the window frame is not greater than 95 mm. Operation can be manual (tape) as well as electric (switch or remote control). TL1000 shutters are not available in the option of the so-called a mosquito net.

UNIVERSAL ROLLER CC1000®

CC1000 - basic shutter system over windows. The service cover is located on the front of the box. These shutters can be mounted to windows whose maximum window frame thickness is not greater than 95 mm. The blinds are hand operated using a tape as well as an electric switch or a remote control. There is no version with a mosquito net.

TP1000K® FOLZ ROLLER with mosquito net

TP1000K is a system that goes to install on a wider window frame up to 188 mm (with the possibility of widening to 250 mm). Using the extension element, we enlarge the depth of the box by 31 or 62 mm. This system makes it possible to place the service cover from the bottom (when the box is installed from the inside) or from the front (when mounted on a wide window frame). Operation is possible with both hand-held tape and electric tape using a switch or remote control. The model with a mosquito net effectively prevents mosquitoes and flies from getting into the rooms, as well as all types of pollen, leaves and other pollutants without preventing access to the interior of fresh air and light.

ROLLER SHAFT TP1000K®

TP1000K is a system that is going to be used on a wide window frame, the dimensions of which reach up to 202 mm (with the used extension up to 264 mm). Using the extension component, we enlarge the depth of the box by 31 mm or 62 mm. This system has the option of a service cover from the bottom (assuming that the box is built in from the inside) or from the front (assuming that the assembly was made on a wide window frame). Manual operation by means of tape and electric with the use of a switch or remote control.

Adress

Optimus-System sp.j. Hala Produkcyjna i punkt obsługi klienta: Miszewko 18b tel(fax) 058 684-89-01
Gdynia Orłowo: ul. Plac Górnośląski 15 tel(fax) 058 664-77-05
Email: [email protected]